And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.878
And
I configure APT to prefer an old version of cowsay
0.034
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.138
And
I accept adding "cowsay" to Additional Software
4.978
And
Additional Software is correctly configured for package "cowsay"
0.748
And
I shutdown Tails and wait for the computer to power off
7.299
And
I start Tails from USB drive "__internal" with network unplugged
39.492
And
I enable persistence
5.940
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
10.781
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.237
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.016
And
available upgrades have been checked
1.137
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.090
And
I can open the Additional Software configuration window from the notification
2.540
And
I shutdown Tails and wait for the computer to power off
4.232
And
I start Tails from USB drive "__internal" with network unplugged
39.569
And
I enable persistence
7.358
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.330
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.226
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066