And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.548
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.660
And
I accept adding "cowsay" to Additional Software
5.033
And
Additional Software is correctly configured for package "cowsay"
0.739
And
I shutdown Tails and wait for the computer to power off
4.359
And
I start Tails from USB drive "__internal" with network unplugged
39.252
And
I enable persistence
6.944
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
12.522
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.268
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.033
And
available upgrades have been checked
1.094
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.490
And
I can open the Additional Software configuration window from the notification
2.578
And
I shutdown Tails and wait for the computer to power off
23.049
And
I start Tails from USB drive "__internal" with network unplugged
39.798
And
I enable persistence
7.140
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
11.741
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.236
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.076
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.046