And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.195
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.020
And
I accept adding "cowsay" to Additional Software
6.196
And
Additional Software is correctly configured for package "cowsay"
0.703
And
I shutdown Tails and wait for the computer to power off
8.024
And
I start Tails from USB drive "__internal" with network unplugged
38.464
And
I enable persistence
7.005
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
9.787
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.219
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.017
And
available upgrades have been checked
1.140
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.179
And
I can open the Additional Software configuration window from the notification
2.598
And
I shutdown Tails and wait for the computer to power off
17.432
And
I start Tails from USB drive "__internal" with network unplugged
38.012
And
I enable persistence
6.720
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
10.281
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.182
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.064
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065