And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:24.265
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.460
And
I accept adding "cowsay" to Additional Software
6.312
And
Additional Software is correctly configured for package "cowsay"
0.621
And
I shutdown Tails and wait for the computer to power off
8.184
And
I start Tails from USB drive "__internal" with network unplugged
39.386
And
I enable persistence
7.402
And
I configure APT to prefer an old version of cowsay
0.043
And
I disable the tails-virt-notify-user.service user unit
0.104
And
I log in to a new session
10.715
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.596
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.017
And
available upgrades have been checked
2.206
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.103
And
I can open the Additional Software configuration window from the notification
2.610
And
I shutdown Tails and wait for the computer to power off
17.936
And
I start Tails from USB drive "__internal" with network unplugged
40.615
And
I enable persistence
6.798
And
I configure APT to prefer an old version of cowsay
0.014
And
I log in to a new session
13.369
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.213
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062