And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.554
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.960
And
I accept adding "cowsay" to Additional Software
3.554
And
Additional Software is correctly configured for package "cowsay"
0.623
And
I shutdown Tails and wait for the computer to power off
7.954
And
I start Tails from USB drive "__internal" with network unplugged
36.009
And
I enable persistence
5.631
And
I configure APT to prefer an old version of cowsay
0.016
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
9.446
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.200
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.015
And
available upgrades have been checked
0.049
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.493
And
I can open the Additional Software configuration window from the notification
2.501
And
I shutdown Tails and wait for the computer to power off
17.024
And
I start Tails from USB drive "__internal" with network unplugged
35.059
And
I enable persistence
5.230
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
9.714
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.167
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059