And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.877
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.709
And
I accept adding "cowsay" to Additional Software
3.651
And
Additional Software is correctly configured for package "cowsay"
0.639
And
I shutdown Tails and wait for the computer to power off
8.088
And
I start Tails from USB drive "__internal" with network unplugged
36.946
And
I enable persistence
6.527
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
10.489
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.182
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.035
And
the network is plugged
0.019
And
available upgrades have been checked
2.159
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.492
And
I can open the Additional Software configuration window from the notification
2.583
And
I shutdown Tails and wait for the computer to power off
13.441
And
I start Tails from USB drive "__internal" with network unplugged
36.141
And
I enable persistence
5.805
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
9.860
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.219
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056