And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:24.519
And
I configure APT to prefer an old version of cowsay
0.017
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.563
And
I accept adding "cowsay" to Additional Software
5.087
And
Additional Software is correctly configured for package "cowsay"
0.778
And
I shutdown Tails and wait for the computer to power off
8.248
And
I start Tails from USB drive "__internal" with network unplugged
38.647
And
I enable persistence
6.931
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
11.683
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.236
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.016
And
available upgrades have been checked
1.113
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.620
And
I can open the Additional Software configuration window from the notification
2.694
And
I shutdown Tails and wait for the computer to power off
23.358
And
I start Tails from USB drive "__internal" with network unplugged
39.602
And
I enable persistence
6.964
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
10.185
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.282
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.070
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068