And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.707
And
I configure APT to prefer an old version of cowsay
0.016
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.606
And
I accept adding "cowsay" to Additional Software
4.938
And
Additional Software is correctly configured for package "cowsay"
0.624
And
I shutdown Tails and wait for the computer to power off
7.921
And
I start Tails from USB drive "__internal" with network unplugged
37.907
And
I enable persistence
6.744
And
I configure APT to prefer an old version of cowsay
0.018
And
I disable the tails-virt-notify-user.service user unit
0.067
And
I log in to a new session
10.473
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.224
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
I prepare the Additional Software upgrade process to fail
0.071
And
the network is plugged
0.015
And
available upgrades have been checked
1.119
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.990
And
I can open the Additional Software configuration window from the notification
2.698
And
I shutdown Tails and wait for the computer to power off
23.481
And
I start Tails from USB drive "__internal" with network unplugged
37.489
And
I enable persistence
6.882
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
9.962
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.188
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.058
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062