And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.101
And
I configure APT to prefer an old version of cowsay
0.015
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.862
And
I accept adding "cowsay" to Additional Software
3.758
And
Additional Software is correctly configured for package "cowsay"
0.683
And
I shutdown Tails and wait for the computer to power off
7.071
And
I start Tails from USB drive "__internal" with network unplugged
38.293
And
I enable persistence
6.372
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
9.947
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.252
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.019
And
available upgrades have been checked
1.146
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.012
And
I can open the Additional Software configuration window from the notification
2.549
And
I shutdown Tails and wait for the computer to power off
17.384
And
I start Tails from USB drive "__internal" with network unplugged
36.565
And
I enable persistence
6.690
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
10.079
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.215
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.079
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056