And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.364
And
I configure APT to prefer an old version of cowsay
0.042
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.077
And
I accept adding "cowsay" to Additional Software
5.030
And
Additional Software is correctly configured for package "cowsay"
0.724
And
I shutdown Tails and wait for the computer to power off
8.600
And
I start Tails from USB drive "__internal" with network unplugged
38.458
And
I enable persistence
6.766
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.066
And
I log in to a new session
10.369
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.314
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.032
And
available upgrades have been checked
2.184
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.472
And
I can open the Additional Software configuration window from the notification
2.566
And
I shutdown Tails and wait for the computer to power off
17.675
And
I start Tails from USB drive "__internal" with network unplugged
38.507
And
I enable persistence
6.026
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
11.510
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.234
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.051
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064