And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.609
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.981
And
I accept adding "cowsay" to Additional Software
5.331
And
Additional Software is correctly configured for package "cowsay"
0.645
And
I shutdown Tails and wait for the computer to power off
7.411
And
I start Tails from USB drive "__internal" with network unplugged
40.175
And
I enable persistence
6.921
And
I configure APT to prefer an old version of cowsay
0.014
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
12.221
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.275
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.106
And
the network is plugged
0.036
And
available upgrades have been checked
1.119
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.044
And
I can open the Additional Software configuration window from the notification
2.591
And
I shutdown Tails and wait for the computer to power off
23.646
And
I start Tails from USB drive "__internal" with network unplugged
40.417
And
I enable persistence
7.379
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
12.475
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.226
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.064
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075