And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.598
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.364
And
I accept adding "cowsay" to Additional Software
5.032
And
Additional Software is correctly configured for package "cowsay"
0.725
And
I shutdown Tails and wait for the computer to power off
8.206
And
I start Tails from USB drive "__internal" with network unplugged
39.499
And
I enable persistence
6.580
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.068
And
I log in to a new session
12.502
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.720
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.026
And
available upgrades have been checked
1.104
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.989
And
I can open the Additional Software configuration window from the notification
2.800
And
I shutdown Tails and wait for the computer to power off
8.689
And
I start Tails from USB drive "__internal" with network unplugged
40.333
And
I enable persistence
6.304
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
11.492
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.665
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.065
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056