And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.546
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.648
And
I accept adding "cowsay" to Additional Software
5.143
And
Additional Software is correctly configured for package "cowsay"
0.767
And
I shutdown Tails and wait for the computer to power off
8.399
And
I start Tails from USB drive "__internal" with network unplugged
38.429
And
I enable persistence
6.932
And
I configure APT to prefer an old version of cowsay
0.016
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
10.646
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.215
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.018
And
available upgrades have been checked
1.112
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.471
And
I can open the Additional Software configuration window from the notification
2.696
And
I shutdown Tails and wait for the computer to power off
4.131
And
I start Tails from USB drive "__internal" with network unplugged
38.426
And
I enable persistence
6.956
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
11.958
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.287
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.046
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067