And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:44.321
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.614
And
I accept adding "cowsay" to Additional Software
3.619
And
Additional Software is correctly configured for package "cowsay"
0.750
And
I shutdown Tails and wait for the computer to power off
7.907
And
I start Tails from USB drive "__internal" with network unplugged
35.942
And
I enable persistence
5.624
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
9.569
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.285
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.023
And
available upgrades have been checked
1.097
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.540
And
I can open the Additional Software configuration window from the notification
2.541
And
I shutdown Tails and wait for the computer to power off
13.123
And
I start Tails from USB drive "__internal" with network unplugged
36.152
And
I enable persistence
5.636
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.721
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.202
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.045
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.074