And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.988
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.025
And
I accept adding "cowsay" to Additional Software
4.907
And
Additional Software is correctly configured for package "cowsay"
0.782
And
I shutdown Tails and wait for the computer to power off
8.055
And
I start Tails from USB drive "__internal" with network unplugged
39.227
And
I enable persistence
6.448
And
I configure APT to prefer an old version of cowsay
0.063
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
9.478
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.545
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.016
And
available upgrades have been checked
0.051
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.606
And
I can open the Additional Software configuration window from the notification
2.918
And
I shutdown Tails and wait for the computer to power off
17.429
And
I start Tails from USB drive "__internal" with network unplugged
38.985
And
I enable persistence
7.020
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
11.190
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.289
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.061
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055