And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.219
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.387
And
I accept adding "cowsay" to Additional Software
3.840
And
Additional Software is correctly configured for package "cowsay"
0.749
And
I shutdown Tails and wait for the computer to power off
4.490
And
I start Tails from USB drive "__internal" with network unplugged
36.890
And
I enable persistence
6.663
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.106
And
I log in to a new session
9.185
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.212
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.014
And
available upgrades have been checked
1.126
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.107
And
I can open the Additional Software configuration window from the notification
2.547
And
I shutdown Tails and wait for the computer to power off
22.574
And
I start Tails from USB drive "__internal" with network unplugged
37.272
And
I enable persistence
5.495
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.029
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.199
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.068
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.100