And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.321
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.286
And
I accept adding "cowsay" to Additional Software
4.949
And
Additional Software is correctly configured for package "cowsay"
0.657
And
I shutdown Tails and wait for the computer to power off
4.169
And
I start Tails from USB drive "__internal" with network unplugged
37.200
And
I enable persistence
6.575
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.079
And
I log in to a new session
10.670
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.534
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.013
And
available upgrades have been checked
1.147
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.221
And
I can open the Additional Software configuration window from the notification
2.544
And
I shutdown Tails and wait for the computer to power off
17.484
And
I start Tails from USB drive "__internal" with network unplugged
37.586
And
I enable persistence
5.604
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.681
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.174
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059