And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.726
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.767
And
I accept adding "cowsay" to Additional Software
3.744
And
Additional Software is correctly configured for package "cowsay"
0.614
And
I shutdown Tails and wait for the computer to power off
8.022
And
I start Tails from USB drive "__internal" with network unplugged
36.809
And
I enable persistence
5.852
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
8.981
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.495
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.021
And
available upgrades have been checked
2.185
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.459
And
I can open the Additional Software configuration window from the notification
2.557
And
I shutdown Tails and wait for the computer to power off
4.061
And
I start Tails from USB drive "__internal" with network unplugged
36.676
And
I enable persistence
5.711
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
10.831
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.174
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.065
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079