And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.298
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.684
And
I accept adding "cowsay" to Additional Software
3.766
And
Additional Software is correctly configured for package "cowsay"
0.581
And
I shutdown Tails and wait for the computer to power off
7.904
And
I start Tails from USB drive "__internal" with network unplugged
35.746
And
I enable persistence
5.364
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.043
And
I log in to a new session
9.459
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.197
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.016
And
available upgrades have been checked
1.082
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.514
And
I can open the Additional Software configuration window from the notification
2.514
And
I shutdown Tails and wait for the computer to power off
13.215
And
I start Tails from USB drive "__internal" with network unplugged
36.767
And
I enable persistence
5.599
And
I configure APT to prefer an old version of cowsay
0.042
And
I log in to a new session
9.428
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.519
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.073
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062