And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.030
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.098
And
I accept adding "cowsay" to Additional Software
4.959
And
Additional Software is correctly configured for package "cowsay"
0.625
And
I shutdown Tails and wait for the computer to power off
8.152
And
I start Tails from USB drive "__internal" with network unplugged
37.409
And
I enable persistence
6.293
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.069
And
I log in to a new session
9.997
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.217
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.015
And
available upgrades have been checked
1.116
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.765
And
I can open the Additional Software configuration window from the notification
2.614
And
I shutdown Tails and wait for the computer to power off
17.474
And
I start Tails from USB drive "__internal" with network unplugged
37.302
And
I enable persistence
6.794
And
I configure APT to prefer an old version of cowsay
0.015
And
I log in to a new session
10.509
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065