And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.621
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.658
And
I accept adding "cowsay" to Additional Software
3.642
And
Additional Software is correctly configured for package "cowsay"
0.611
And
I shutdown Tails and wait for the computer to power off
7.841
And
I start Tails from USB drive "__internal" with network unplugged
35.599
And
I enable persistence
5.324
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.071
And
I log in to a new session
9.305
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.213
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.013
And
available upgrades have been checked
2.167
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.485
And
I can open the Additional Software configuration window from the notification
2.578
And
I shutdown Tails and wait for the computer to power off
17.017
And
I start Tails from USB drive "__internal" with network unplugged
36.506
And
I enable persistence
6.253
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.781
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.197
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.067
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066