And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.986
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.536
And
I accept adding "cowsay" to Additional Software
3.667
And
Additional Software is correctly configured for package "cowsay"
0.710
And
I shutdown Tails and wait for the computer to power off
4.072
And
I start Tails from USB drive "__internal" with network unplugged
37.160
And
I enable persistence
6.957
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
10.442
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.236
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.016
And
available upgrades have been checked
2.176
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.181
And
I can open the Additional Software configuration window from the notification
2.635
And
I shutdown Tails and wait for the computer to power off
22.652
And
I start Tails from USB drive "__internal" with network unplugged
37.864
And
I enable persistence
6.449
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.796
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.533
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058