And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.692
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.754
And
I accept adding "cowsay" to Additional Software
4.896
And
Additional Software is correctly configured for package "cowsay"
0.640
And
I shutdown Tails and wait for the computer to power off
8.302
And
I start Tails from USB drive "__internal" with network unplugged
39.632
And
I enable persistence
7.057
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.080
And
I log in to a new session
11.672
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.190
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.023
And
available upgrades have been checked
2.146
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.541
And
I can open the Additional Software configuration window from the notification
2.679
And
I shutdown Tails and wait for the computer to power off
23.260
And
I start Tails from USB drive "__internal" with network unplugged
38.436
And
I enable persistence
5.551
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
12.195
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.229
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.069
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075