And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.396
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.518
And
I accept adding "cowsay" to Additional Software
3.806
And
Additional Software is correctly configured for package "cowsay"
1.049
And
I shutdown Tails and wait for the computer to power off
8.227
And
I start Tails from USB drive "__internal" with network unplugged
36.887
And
I enable persistence
6.292
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
9.336
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.208
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.018
And
available upgrades have been checked
2.192
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.606
And
I can open the Additional Software configuration window from the notification
2.560
And
I shutdown Tails and wait for the computer to power off
17.540
And
I start Tails from USB drive "__internal" with network unplugged
37.577
And
I enable persistence
6.682
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
9.311
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.299
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.040
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057