And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.919
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.229
And
I accept adding "cowsay" to Additional Software
3.707
And
Additional Software is correctly configured for package "cowsay"
0.572
And
I shutdown Tails and wait for the computer to power off
3.995
And
I start Tails from USB drive "__internal" with network unplugged
36.180
And
I enable persistence
5.688
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
9.361
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.193
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.013
And
available upgrades have been checked
2.155
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.465
And
I can open the Additional Software configuration window from the notification
2.581
And
I shutdown Tails and wait for the computer to power off
17.071
And
I start Tails from USB drive "__internal" with network unplugged
35.645
And
I enable persistence
5.462
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.202
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.280
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.081