And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.153
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.734
And
I accept adding "cowsay" to Additional Software
4.961
And
Additional Software is correctly configured for package "cowsay"
0.714
And
I shutdown Tails and wait for the computer to power off
8.161
And
I start Tails from USB drive "__internal" with network unplugged
39.976
And
I enable persistence
7.140
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
10.490
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.244
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.018
And
available upgrades have been checked
1.081
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.542
And
I can open the Additional Software configuration window from the notification
2.833
And
I shutdown Tails and wait for the computer to power off
17.621
And
I start Tails from USB drive "__internal" with network unplugged
38.158
And
I enable persistence
7.523
And
I configure APT to prefer an old version of cowsay
0.019
And
I log in to a new session
10.526
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.238
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.078
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.080