And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.642
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.720
And
I accept adding "cowsay" to Additional Software
3.703
And
Additional Software is correctly configured for package "cowsay"
0.578
And
I shutdown Tails and wait for the computer to power off
8.196
And
I start Tails from USB drive "__internal" with network unplugged
36.172
And
I enable persistence
6.215
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
8.752
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.203
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.015
And
available upgrades have been checked
1.099
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.620
And
I can open the Additional Software configuration window from the notification
2.505
And
I shutdown Tails and wait for the computer to power off
13.066
And
I start Tails from USB drive "__internal" with network unplugged
36.139
And
I enable persistence
6.440
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
8.763
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.180
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.042
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.094