And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.385
And
I configure APT to prefer an old version of cowsay
0.016
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.147
And
I accept adding "cowsay" to Additional Software
4.866
And
Additional Software is correctly configured for package "cowsay"
0.738
And
I shutdown Tails and wait for the computer to power off
8.266
And
I start Tails from USB drive "__internal" with network unplugged
39.813
And
I enable persistence
6.865
And
I configure APT to prefer an old version of cowsay
0.014
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
12.238
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.238
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.030
And
available upgrades have been checked
0.041
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.431
And
I can open the Additional Software configuration window from the notification
2.865
And
I shutdown Tails and wait for the computer to power off
12.234
And
I start Tails from USB drive "__internal" with network unplugged
38.827
And
I enable persistence
6.718
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
10.539
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.553
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.035
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061