And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.873
And
I configure APT to prefer an old version of cowsay
0.015
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.319
And
I accept adding "cowsay" to Additional Software
3.689
And
Additional Software is correctly configured for package "cowsay"
0.588
And
I shutdown Tails and wait for the computer to power off
7.890
And
I start Tails from USB drive "__internal" with network unplugged
36.934
And
I enable persistence
6.477
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
9.268
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.167
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.021
And
available upgrades have been checked
1.118
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.460
And
I can open the Additional Software configuration window from the notification
2.535
And
I shutdown Tails and wait for the computer to power off
22.181
And
I start Tails from USB drive "__internal" with network unplugged
35.582
And
I enable persistence
5.672
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
9.665
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.593
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.048