And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.011
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.798
And
I accept adding "cowsay" to Additional Software
4.210
And
Additional Software is correctly configured for package "cowsay"
0.633
And
I shutdown Tails and wait for the computer to power off
4.355
And
I start Tails from USB drive "__internal" with network unplugged
37.961
And
I enable persistence
5.795
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
10.270
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.230
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.020
And
available upgrades have been checked
1.137
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.021
And
I can open the Additional Software configuration window from the notification
2.571
And
I shutdown Tails and wait for the computer to power off
17.615
And
I start Tails from USB drive "__internal" with network unplugged
37.329
And
I enable persistence
6.661
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.892
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.165
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063