And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.030
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.267
And
I accept adding "cowsay" to Additional Software
4.958
And
Additional Software is correctly configured for package "cowsay"
0.682
And
I shutdown Tails and wait for the computer to power off
8.167
And
I start Tails from USB drive "__internal" with network unplugged
38.266
And
I enable persistence
7.277
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.108
And
I log in to a new session
10.369
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.228
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.016
And
available upgrades have been checked
1.136
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.578
And
I can open the Additional Software configuration window from the notification
2.789
And
I shutdown Tails and wait for the computer to power off
12.270
And
I start Tails from USB drive "__internal" with network unplugged
38.689
And
I enable persistence
7.037
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
11.943
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.249
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060