And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:27.465
And
I configure APT to prefer an old version of cowsay
0.033
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.952
And
I accept adding "cowsay" to Additional Software
5.043
And
Additional Software is correctly configured for package "cowsay"
1.183
And
I shutdown Tails and wait for the computer to power off
4.448
And
I start Tails from USB drive "__internal" with network unplugged
41.905
And
I enable persistence
6.935
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
13.152
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.283
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.074
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.018
And
available upgrades have been checked
1.114
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.571
And
I can open the Additional Software configuration window from the notification
2.540
And
I shutdown Tails and wait for the computer to power off
17.845
And
I start Tails from USB drive "__internal" with network unplugged
41.516
And
I enable persistence
6.686
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
11.778
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.194
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.061
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065