And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:25.205
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.488
And
I accept adding "cowsay" to Additional Software
6.287
And
Additional Software is correctly configured for package "cowsay"
0.667
And
I shutdown Tails and wait for the computer to power off
8.123
And
I start Tails from USB drive "__internal" with network unplugged
41.015
And
I enable persistence
9.020
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.067
And
I log in to a new session
11.373
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.617
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.017
And
available upgrades have been checked
2.258
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.045
And
I can open the Additional Software configuration window from the notification
2.590
And
I shutdown Tails and wait for the computer to power off
18.137
And
I start Tails from USB drive "__internal" with network unplugged
41.609
And
I enable persistence
6.797
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
12.667
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.227
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059