And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:26.168
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.946
And
I accept adding "cowsay" to Additional Software
6.094
And
Additional Software is correctly configured for package "cowsay"
0.591
And
I shutdown Tails and wait for the computer to power off
8.146
And
I start Tails from USB drive "__internal" with network unplugged
39.966
And
I enable persistence
8.647
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
11.360
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.253
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.016
And
available upgrades have been checked
1.179
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.097
And
I can open the Additional Software configuration window from the notification
2.647
And
I shutdown Tails and wait for the computer to power off
18.484
And
I start Tails from USB drive "__internal" with network unplugged
41.584
And
I enable persistence
7.307
And
I configure APT to prefer an old version of cowsay
0.017
And
I log in to a new session
13.661
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.377
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.083
And
the network is plugged
0.027
Then
the Additional Software upgrade service has started
0.060
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.083