And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.718
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.359
And
I accept adding "cowsay" to Additional Software
3.940
And
Additional Software is correctly configured for package "cowsay"
1.038
And
I shutdown Tails and wait for the computer to power off
8.485
And
I start Tails from USB drive "__internal" with network unplugged
38.892
And
I enable persistence
6.324
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
10.517
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.225
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.021
And
available upgrades have been checked
2.158
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.481
And
I can open the Additional Software configuration window from the notification
2.559
And
I shutdown Tails and wait for the computer to power off
17.483
And
I start Tails from USB drive "__internal" with network unplugged
37.761
And
I enable persistence
5.771
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.769
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.258
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.031
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064