And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.950
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.793
And
I accept adding "cowsay" to Additional Software
4.934
And
Additional Software is correctly configured for package "cowsay"
0.570
And
I shutdown Tails and wait for the computer to power off
7.965
And
I start Tails from USB drive "__internal" with network unplugged
37.490
And
I enable persistence
6.844
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
8.914
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.212
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.014
And
available upgrades have been checked
3.287
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.552
And
I can open the Additional Software configuration window from the notification
2.602
And
I shutdown Tails and wait for the computer to power off
23.069
And
I start Tails from USB drive "__internal" with network unplugged
36.452
And
I enable persistence
6.779
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
9.618
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.224
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.029
Then
the Additional Software upgrade service has started
0.075
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.069