And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.552
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.450
And
I accept adding "cowsay" to Additional Software
5.123
And
Additional Software is correctly configured for package "cowsay"
0.639
And
I shutdown Tails and wait for the computer to power off
7.961
And
I start Tails from USB drive "__internal" with network unplugged
37.236
And
I enable persistence
6.745
And
I configure APT to prefer an old version of cowsay
0.067
And
I disable the tails-virt-notify-user.service user unit
0.131
And
I log in to a new session
10.609
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.581
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.015
And
available upgrades have been checked
2.165
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.415
And
I can open the Additional Software configuration window from the notification
2.573
And
I shutdown Tails and wait for the computer to power off
17.549
And
I start Tails from USB drive "__internal" with network unplugged
37.351
And
I enable persistence
6.133
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
11.180
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.228
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062