And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.925
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.025
And
I accept adding "cowsay" to Additional Software
5.150
And
Additional Software is correctly configured for package "cowsay"
0.676
And
I shutdown Tails and wait for the computer to power off
8.125
And
I start Tails from USB drive "__internal" with network unplugged
38.065
And
I enable persistence
5.397
And
I configure APT to prefer an old version of cowsay
0.014
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
10.618
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.235
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.013
And
available upgrades have been checked
2.170
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.450
And
I can open the Additional Software configuration window from the notification
2.552
And
I shutdown Tails and wait for the computer to power off
17.242
And
I start Tails from USB drive "__internal" with network unplugged
37.810
And
I enable persistence
6.576
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
11.676
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.486
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.065
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056