And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:24.549
And
I configure APT to prefer an old version of cowsay
0.016
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.829
And
I accept adding "cowsay" to Additional Software
5.368
And
Additional Software is correctly configured for package "cowsay"
0.735
And
I shutdown Tails and wait for the computer to power off
8.103
And
I start Tails from USB drive "__internal" with network unplugged
38.810
And
I enable persistence
6.900
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
12.996
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.212
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.084
And
I prepare the Additional Software upgrade process to fail
0.096
And
the network is plugged
0.024
And
available upgrades have been checked
2.186
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.968
And
I can open the Additional Software configuration window from the notification
2.634
And
I shutdown Tails and wait for the computer to power off
18.432
And
I start Tails from USB drive "__internal" with network unplugged
40.733
And
I enable persistence
8.486
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
11.779
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.628
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.036
Then
the Additional Software upgrade service has started
0.071
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.070