And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.598
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.847
And
I accept adding "cowsay" to Additional Software
3.570
And
Additional Software is correctly configured for package "cowsay"
0.639
And
I shutdown Tails and wait for the computer to power off
4.332
And
I start Tails from USB drive "__internal" with network unplugged
35.660
And
I enable persistence
6.344
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.073
And
I log in to a new session
9.017
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.219
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.016
And
available upgrades have been checked
1.098
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.559
And
I can open the Additional Software configuration window from the notification
2.503
And
I shutdown Tails and wait for the computer to power off
7.993
And
I start Tails from USB drive "__internal" with network unplugged
34.576
And
I enable persistence
6.207
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.361
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.207
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.080
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054