And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.368
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.573
And
I accept adding "cowsay" to Additional Software
4.955
And
Additional Software is correctly configured for package "cowsay"
0.743
And
I shutdown Tails and wait for the computer to power off
8.414
And
I start Tails from USB drive "__internal" with network unplugged
37.464
And
I enable persistence
5.301
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.117
And
I log in to a new session
10.340
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.333
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.019
And
available upgrades have been checked
2.228
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.007
And
I can open the Additional Software configuration window from the notification
2.587
And
I shutdown Tails and wait for the computer to power off
22.282
And
I start Tails from USB drive "__internal" with network unplugged
39.179
And
I enable persistence
6.596
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.541
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.191
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075