And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.915
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.907
And
I accept adding "cowsay" to Additional Software
3.769
And
Additional Software is correctly configured for package "cowsay"
0.766
And
I shutdown Tails and wait for the computer to power off
4.515
And
I start Tails from USB drive "__internal" with network unplugged
37.356
And
I enable persistence
6.804
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
10.204
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.200
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.017
And
available upgrades have been checked
1.181
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.587
And
I can open the Additional Software configuration window from the notification
2.578
And
I shutdown Tails and wait for the computer to power off
14.060
And
I start Tails from USB drive "__internal" with network unplugged
38.442
And
I enable persistence
7.221
And
I configure APT to prefer an old version of cowsay
0.014
And
I log in to a new session
10.129
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.222
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.063
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065