And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.135
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.817
And
I accept adding "cowsay" to Additional Software
4.918
And
Additional Software is correctly configured for package "cowsay"
0.710
And
I shutdown Tails and wait for the computer to power off
4.354
And
I start Tails from USB drive "__internal" with network unplugged
38.319
And
I enable persistence
6.762
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
9.870
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.217
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.071
And
the network is plugged
0.017
And
available upgrades have been checked
2.213
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.604
And
I can open the Additional Software configuration window from the notification
2.582
And
I shutdown Tails and wait for the computer to power off
17.703
And
I start Tails from USB drive "__internal" with network unplugged
38.921
And
I enable persistence
7.145
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
10.647
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.259
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.079
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.072