And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:24.772
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.710
And
I accept adding "cowsay" to Additional Software
4.879
And
Additional Software is correctly configured for package "cowsay"
1.059
And
I shutdown Tails and wait for the computer to power off
7.151
And
I start Tails from USB drive "__internal" with network unplugged
39.620
And
I enable persistence
6.702
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
12.381
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.564
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.022
And
available upgrades have been checked
2.167
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.560
And
I can open the Additional Software configuration window from the notification
2.554
And
I shutdown Tails and wait for the computer to power off
23.090
And
I start Tails from USB drive "__internal" with network unplugged
39.886
And
I enable persistence
8.971
And
I configure APT to prefer an old version of cowsay
0.017
And
I log in to a new session
10.558
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.256
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.064
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075