And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.968
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.005
And
I accept adding "cowsay" to Additional Software
5.269
And
Additional Software is correctly configured for package "cowsay"
0.718
And
I shutdown Tails and wait for the computer to power off
8.313
And
I start Tails from USB drive "__internal" with network unplugged
39.679
And
I enable persistence
6.848
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.043
And
I log in to a new session
10.723
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.215
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.028
And
available upgrades have been checked
1.106
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.066
And
I can open the Additional Software configuration window from the notification
2.627
And
I shutdown Tails and wait for the computer to power off
17.645
And
I start Tails from USB drive "__internal" with network unplugged
37.843
And
I enable persistence
6.981
And
I configure APT to prefer an old version of cowsay
0.018
And
I log in to a new session
10.849
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.200
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.074
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.050
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059