And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.091
And
I configure APT to prefer an old version of cowsay
0.017
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.788
And
I accept adding "cowsay" to Additional Software
4.925
And
Additional Software is correctly configured for package "cowsay"
0.665
And
I shutdown Tails and wait for the computer to power off
8.289
And
I start Tails from USB drive "__internal" with network unplugged
38.591
And
I enable persistence
7.088
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.071
And
I log in to a new session
10.977
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.221
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.138
And
available upgrades have been checked
0.058
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.490
And
I can open the Additional Software configuration window from the notification
2.612
And
I shutdown Tails and wait for the computer to power off
18.738
And
I start Tails from USB drive "__internal" with network unplugged
39.172
And
I enable persistence
5.919
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
11.426
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.196
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.063
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060