And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.372
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.002
And
I accept adding "cowsay" to Additional Software
5.007
And
Additional Software is correctly configured for package "cowsay"
0.978
And
I shutdown Tails and wait for the computer to power off
4.188
And
I start Tails from USB drive "__internal" with network unplugged
38.880
And
I enable persistence
6.894
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
10.502
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.218
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.012
And
available upgrades have been checked
1.125
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.000
And
I can open the Additional Software configuration window from the notification
2.578
And
I shutdown Tails and wait for the computer to power off
22.773
And
I start Tails from USB drive "__internal" with network unplugged
38.267
And
I enable persistence
6.534
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
11.819
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.235
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.027
Then
the Additional Software upgrade service has started
0.044
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.050