And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.563
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.336
And
I accept adding "cowsay" to Additional Software
4.985
And
Additional Software is correctly configured for package "cowsay"
0.691
And
I shutdown Tails and wait for the computer to power off
8.124
And
I start Tails from USB drive "__internal" with network unplugged
38.081
And
I enable persistence
7.053
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.042
And
I log in to a new session
12.070
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.271
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.019
And
available upgrades have been checked
1.096
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.539
And
I can open the Additional Software configuration window from the notification
2.563
And
I shutdown Tails and wait for the computer to power off
23.189
And
I start Tails from USB drive "__internal" with network unplugged
39.963
And
I enable persistence
6.289
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
11.965
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.213
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060