And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.908
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.712
And
I accept adding "cowsay" to Additional Software
4.852
And
Additional Software is correctly configured for package "cowsay"
0.747
And
I shutdown Tails and wait for the computer to power off
4.169
And
I start Tails from USB drive "__internal" with network unplugged
39.947
And
I enable persistence
7.709
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.089
And
I log in to a new session
9.963
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.244
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.022
And
available upgrades have been checked
0.062
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.655
And
I can open the Additional Software configuration window from the notification
2.617
And
I shutdown Tails and wait for the computer to power off
4.580
And
I start Tails from USB drive "__internal" with network unplugged
41.444
And
I enable persistence
6.967
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.601
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.214
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.074
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054