And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.206
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.566
And
I accept adding "cowsay" to Additional Software
4.868
And
Additional Software is correctly configured for package "cowsay"
0.628
And
I shutdown Tails and wait for the computer to power off
7.901
And
I start Tails from USB drive "__internal" with network unplugged
36.469
And
I enable persistence
5.380
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.090
And
I log in to a new session
9.111
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.264
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.016
And
available upgrades have been checked
1.098
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.588
And
I can open the Additional Software configuration window from the notification
2.586
And
I shutdown Tails and wait for the computer to power off
17.173
And
I start Tails from USB drive "__internal" with network unplugged
36.259
And
I enable persistence
5.372
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
9.127
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.238
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.041
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056